Instructions - Taking measurements - How to do it right!

!! In the product photos you will find a sketch with an explanation of the dimensions!

Bench cushions - rectangular & square

Please only measure the width and depth (square, rectangular) of your bench.
We do not offer rounding and notches, so you should only measure the pure rectangular or square seat.
The height (thickness of the foam) is specified in the configurator, you can choose between 4, 6 & 8 cm thickness.
The zip is located on the width, which is usually the longer side.
In the product photos you will also find a sketch with an explanation of how to enter the measurements.

Seat cushion & chair cushion with bow - square, rectangular, trapezoid

Please first measure the width at the front of the chair (where the legs are bent). Then measure the depth (from the front where the legs are bent to the back of the backrest) and the width at the back (at the backrest).
We do not offer rounded edges and notches, so you should measure the seat only.
The height (thickness of the foam) is specified in the configurator and you can choose between 4.6 & 8 cm thickness. The zip is of course always on the rear side.
You will also find a sketch with an explanation of the dimensions in the product photos.

Replacement covers - square, rectangular, trapezoidal

Please first measure the width at the front of the chair (where the legs are bent). Then the depth (from the front where the legs are bent to the back of the backrest) and finally the width at the back (at the backrest).
The zip is of course always on the rear side.
The height is fixed in the configurator, you can choose between 2 & 30 cm.
In the product photos you will also find a sketch with an explanation of how to enter the dimensions.

Cushion covers - square, rectangular